In earlier blogs (Part 1 and Part 2 of this series) I described how I have developed a Framework that allows developers to create DotNetNuke (DNN) modules using the new ASP.NET MVC Framework. In this blog I will describe the new base class which is used to enable this ability - MvcModuleApplication.
Prior to DotNetNuke 5.0, all module controls had to be ASP.NET User Controls that inherited from PortalModuleBase – a base class in the DotNetNuke Web Application Framework that provided the context necessary for DotNetNuke’s Module Injection logic to load and inject the module control in the page. (Since about DNN 4.4 a module control was not required to be an ascx file – it could be a compiled server control, but it still had to inherit from PortalModuleBase and thus ultimately from UserControl).
IModuleControl
In DNN 5.0 an interface was introduced – IModuleControl – and the Module Injection logic was refactored to require the control to implement IModuleControl, rather than inherit from PortalModuleBase. PortalModuleBase itself was refactored to implement this interface so no existing modules were broken.
Creation of this interface means that it is no longer necessary to inherit from UserControl – although we are still required to ultimately inherit from the base class Control.
MvcModuleApplication
As demonstrated in Part 1 of this series, MVC Modules are required to include a class that inherits from MvcModuleApplication.
Listing 1 – The MVC_TestApplication class |
1: public class MVC_TestApplication : MvcModuleApplication
2: {
3: protected override string FolderPath
4: {
5: get { return "MVC_Test"; }
6: }
7:
8: protected override void Init()
9: {
10: base.Init();
11: RegisterRoutes(Routes);
12: }
13:
14: private static void RegisterRoutes(RouteCollection routes)
15: {
16: routes.RegisterDefaultRoute("MVC_Test.Controllers");
17: }
18: }
|
Listing 1 shows the class we added to the Test MVC module we created in the first part of this series. As discussed above, DotNetNuke Modules need to implement the interface IModuleControl and inherit from Control (this is necessary as the framework either needs to load a UserControl (ie ascx) or instantiate a Control and add it to the Controls collection of the Container. This is demonstrated in Listing 2, which shows the new base class – MvcModuleApplication - before we add any MVC Framework enabling code.
Listing 2 – The MvcModuleApplication class
|
1: namespace DotNetNuke.Web.Mvc
2: {
3: public abstract class MvcModuleApplication : Control, IModuleControl
4: {
5: #region IModuleControl Implementation
6:
7: public Control Control
8: {
9: get { throw new NotImplementedException(); }
10: }
11:
12: public string ControlPath
13: {
14: get { throw new NotImplementedException(); }
15: }
16:
17: public string ControlName
18: {
19: get { throw new NotImplementedException(); }
20: }
21:
22: public string LocalResourceFile
23: {
24: get { throw new NotImplementedException(); }
25: set { throw new NotImplementedException(); }
26: }
27:
28: public ModuleInstanceContext ModuleContext
29: {
30: get
31: {
32: if (_moduleContext == null)
33: {
34: _moduleContext = new ModuleInstanceContext(this);
35: }
36: return _moduleContext;
37: }
38: }
39:
40: #endregion
41: }
42: }
|
Now that we have our base class, we can add the pieces to enable MVC modules. In Part 2 of this series I described the MVC Pipeline. We are going to plug in to this pipeline right at the beginning by implement logic similar to the ProcessRequest method of the MvcHandler. (So readers don’t have to refer back to the earlier blog, this method is shown in Listing 3).
Listing 3 - MvcHandler, ProcessRequest method
|
1: protected internal virtual void ProcessRequest(HttpContextBase httpContext) {
2: AddVersionHeader(httpContext);
3:
4: // Get the controller type
5: string controllerName = RequestContext.RouteData.GetRequiredString("controller");
6:
7: // Instantiate the controller and call Execute
8: IControllerFactory factory = ControllerBuilder.GetControllerFactory();
9: IController controller = factory.CreateController(RequestContext, controllerName);
10: if (controller == null) {
11: throw new InvalidOperationException(
12: String.Format(
13: CultureInfo.CurrentUICulture,
14: MvcResources.ControllerBuilder_FactoryReturnedNull,
15: factory.GetType(),
16: controllerName));
17: }
18: try {
19: controller.Execute(RequestContext);
20: }
21: finally {
22: factory.ReleaseController(controller);
23: }
24: }
|
As the MvcModuleApplication class inherits from Control it is part of the WebForms Page Life Cycle. We will override the OnInit method which is our first opportunity to implement our own code (Listing 4).
Listing 4 – MvcModuleApplication, OnInit
|
1: protected override void OnInit(EventArgs e)
2: {
3: base.OnInit(e);
4:
5: //Wrap the http Context
6: HttpContextBase httpContext = new HttpContextWrapper(HttpContext.Current);
7:
8: // Setup the module's context
9: ModuleRequestContext moduleRequestContext = new ModuleRequestContext
10: {
11: ModuleContext = ModuleContext,
12: ModuleRoutingUrl = "", // for now we will pass in an empty string
13: HttpContext = httpContext
14: };
15:
16: _moduleResult = ExecuteRequest(moduleRequestContext);
17: }
|
In this method we first create an instance of HttpContextBase – from the HttpContext (line 6). The MVC Framework uses this abstract base class to enable better testability, so we need to do the same.
Next, we create a ModuleRequestContext object (lines 9-14). This class is a helper class that enables us to pass around the ModuleContext (from IModuleControl) a RoutingUrl and the HttpContext to any method that needs this information.
Finally we call the ExecuteRequest method, passing it this helper object and getting a ModuleRequestResult back (line 16).
Listing 5 – MvcModuleApplication, ExecuteRequest
|
1: public virtual ModuleRequestResult ExecuteRequest(ModuleRequestContext context) {
2: EnsureInitialized(context.HttpContext);
3:
4: // Create a rewritten HttpRequest (wrapped in an HttpContext) to provide to the
5: //routing system
6: HttpContextBase rewrittenContext = new RewrittenHttpContext(context.HttpContext,
7: context.ModuleRoutingUrl);
8:
9: // Route the request
10: RouteData routeData = GetRouteData(rewrittenContext);
11:
12: // Setup request context
13: string controllerName = routeData.GetRequiredString("controller");
14: RequestContext requestContext = new RequestContext(context.HttpContext, routeData);
15:
16: // Construct the controller using the ControllerFactory
17: IControllerFactory factory = ControllerBuilder.GetControllerFactory();
18: IController controller = factory.CreateController(requestContext, controllerName);
19: try {
20: // DotNetNuke Mvc Modules must implement IModuleController (not just IController)
21: // Because we need to retrieve the ActionResult without executing it, IController
22: // won't cut it so attempt to adapt the Controller if it does not directly
23: // implement IModuleController
24: IModuleController moduleController = controller as IModuleController;
25: if (moduleController == null)
26: {
27: moduleController = AdaptController(controller);
28: }
29: if (moduleController == null) {
30: throw new InvalidOperationException("Could not construct ModuleController");
31: }
32:
33: // Execute the controller and capture the result
34: moduleController.Execute(requestContext);
35: ActionResult result = moduleController.ResultOfLastExecute;
36:
37: // Return the final result
38: return new ModuleRequestResult {
39: ActionResult = result,
40: ControllerContext = moduleController.ControllerContext,
41: ModuleContext = context.ModuleContext
42: };
43: }
44: finally {
45: factory.ReleaseController(controller);
46: }
47: }
|
The ExecuteRequest method (Listing 5) is very similar to the ProcessRequest method of MvcHandler, and so it should be as we need to do the same things, construct a Controller class and execute the Controller so it can Invoke the appropriate action. So lines 17 and 18 of Listing 5 are almost identical to lines 8 and 9 of Listing 3.
However there are a few differences.
- At the beginning of the method we do some setup work that is handled by other classes in the ASP.NET MVC Pipeline (lines 2-10).
- DotNetNuke MVC Modules must implement IModuleController (not just IController), so we attempt to cast the returner controller to IModuleController, and if that fails we attempt to adapt it (line 27)
- After we call the Execute method of Controller we then use the IModuleController’s "ResultOfLastExecute property to trap the ActionResult, which is returnedd by the Controller’s “action” method (lines 34-35).
- We generate a ModuleRequestResult to return to the caller code in OnInit (lines 38-42)
The important difference here is that unlike the main MVC Framework we need to trap the ActionResult. Two helper classes allow us to achieve this.
MvcControllerAdapter and ResultCapturingActionInvoker classes
Listing 6 – The MvcControllerAdapter Class
|
1: public class MvcControllerAdapter : IModuleController
2: {
3: #region Private Members
4:
5: private Controller _adaptedController;
6: private ResultCapturingActionInvoker _actionInvoker;
7:
8: #endregion
9:
10: #region Constructors
11:
12: public MvcControllerAdapter(Controller controller)
13: {
14: _adaptedController = controller;
15: _actionInvoker = new ResultCapturingActionInvoker();
16: _adaptedController.ActionInvoker = _actionInvoker;
17: }
18:
19: #endregion
20:
21: #region IModuleController Members
22:
23: public ActionResult ResultOfLastExecute
24: {
25: get { return _actionInvoker.ResultOfLastInvoke; }
26: }
27:
28: public ControllerContext ControllerContext
29: {
30: get { return _adaptedController.ControllerContext; }
31: }
32:
33: #endregion
34:
35: #region Public Methods
36:
37: public void Execute(RequestContext requestContext)
38: {
39: if (_adaptedController.ActionInvoker != _actionInvoker)
40: {
41: throw new InvalidOperationException("Could not construct Controller");
42: }
43: ((IController)_adaptedController).Execute(requestContext);
44: }
45:
46: #endregion
47:
48: }
|
The MvcControllerAdapter class (Listing 6) allows us to adapt standard MVC Framework Controller’s so that they implement the additional IModuleController interface. The main job of the MvcControllerAdapter is to replace the Controller’s ActionInvoker with a ResultCapturingActionInvoker (line 15). The ResultCapturingActionInvoker (Listing 7) captures the result of the Action and exposes it as the ResultofLastInvoke property.
Listing 7 – The ResultCapturingActionInvoker Class
|
1: public class ResultCapturingActionInvoker : ControllerActionInvoker
2: {
3: #region Public Properties
4:
5: public ActionResult ResultOfLastInvoke { get; set; }
6:
7: #endregion
8:
9: #region Protected Methods
10:
11: protected override void InvokeActionResult(ControllerContext controllerContext,
12: ActionResult actionResult)
13: {
14: // Do not invoke the action. Instead, store it for later retrieval
15: ResultOfLastInvoke = actionResult;
16: }
17:
18: #endregion
19: }
|
So why do we need to capture the ActionResult?
In the standard MVC Pipeline the next phase after invoking the action is to render the View. DotNetNuke modules need to render their View inside the Container provided. The ExecuteRequest method of the MvcModuleApplication class returns the ModuleRequestResult (which contains the captured ActionResult) and saves it in a private variable.
Now, we need to remember that the MvcModuleApplication class inherits from the base Control class. DotNetNuke will have instantiated this class and added it to the Controls collection of the Container. We use this fact in the RenderControl method to render our View, by executing the ActionResult (which as long as a ViewResult was returned will render the View inside the Container). (see Listing 8)
Listing 8 – MvcModuleApplication, RenderControl
|
1: public override void RenderControl(System.Web.UI.HtmlTextWriter writer)
2: {
3: if (_moduleResult != null)
4: {
5: //Execute the ActionResult
6: _moduleResult.ActionResult.ExecuteResult(_moduleResult.ControllerContext);
7: }
8: }
|
And that’s how its done.
Conclusions
So in conclusion the process used to enable MVC modules to be created is as follows.
- During the Init phase of the Page Lifecycle, mimic the MvcHandler to instantiate an MVC Controller class
- Adapt the Controller to modify its ActionInvoker so we can capture the ActionResult from the Controller’s action method.
- During the render phase of the Page LifeCycle, execute the returned ActionResult, to render the View.
3241088b-5647-43a0-926a-090983b3a940|0|.0